Welcome to the Taizhou city sound electronic technology limited company official website!
400-006-1982
PRODUCT
Location:HOME > PRODUCT
  • FSD-4216

FSD-4216

Name : FSD-4216

Type : Piezo Buzzer

Drive Mode : Active Buzzer

Technology : Lead Buzzer

Size : >30mm

Description:

A. SCOPE 
This specification applies piezo buzzer, FSD-4216
 

B. SPECIFICATION

No.

Item

Unit

Specification

Condition

1

Oscillation Frequency

KHz

3.0±0.5


2

Operating Voltage

VDC

3 ~ 20


3

Rated Voltage

VDC

12


4

Current Consumption

mA

MAX. 10

at Rated Voltage

5

Sound Pressure Level

dB

MIN. 80

at 30cm at Rated Voltage

6

Tone Nature


Constant


7

Operating Temperature

-20~ +60


8

Storage Temperature

-30 ~ +70


9

Dimension

mm

Φ42x H16

See appearance drawing

10

Weight (MAX)

gram

4.0


11

Housing Material


ABS( Black )


12

Leading Pin


 Wire Type

See appearance drawing

13

Environmental  
Protection Regulation


 RoHS


 
C. APPEARANCE DRAWING  

未標題-8

Tol : ± 0.5      Unit: mm


D.TESTING METHOD    
Standard Measurement conditions
Temperature:25±2℃  Humidity:45-65%

Acoustic Characteristics:
The oscillation frequency, current consumption and sound pressure are measured by the 
measuring instruments shown below

In the measuring test, buzzer is placed as follows:

 

E. VOLTAGE / CURRENT / SOUND PRESSURE CHARACTERISTICS

  
F. RELIABILITY TEST

NO.

ITEM

TEST CONDITION AND REQUIREMENT

1

High Temperature
Test (Storage)

After being placed in a chamber with 702℃ for 96 hours and then being placed in normal condition for 2 hours.
Allowable variation of SPL after test: 10dB.

2

Low Temperature
Test (Storage)

After being Placed in a chamber with -302℃ for 96 hours and then being placed in normal condition for 2 hours.
Allowable variation of SPL after test: 10dB.

3

Humidity Test

After being Placed in a chamber with 90-95% R.H. at 402℃ for 96 hours and then being placed in normal condition for 2 hours.
Allowable variation of SPL after test: 10dB.

4

Temperature Cycle
Test

The part shall be subjected to 5 cycles. One cycle shall be consist of: 
 
Allowable variation of SPL after test: 10dB.

5

Drop Test

Drop on a hard wood board of 4cm thick, any directions ,6 times, at the height of 75cm .
Allowable variation of SPL after test: 10dB.

6

Vibration Test

After being applied vibration of amplitude of 1.5mmwith 10 to 55 Hz band of vibration frequency to each of 3 perpendicular directions for 2 hours .
Allowable variation of SPL after test: 10dB.

7

Solderability
Test

Lead terminals are immersed in rosin for 5 seconds and then immersed in solder bath of +3005℃ for 31 seconds .
90% min. lead terminals shall be wet with solder
(Except the edge of terminals).

8

Terminal Strength
Pulling Test

The force of 9.8N(1.0kg) is applied to each terminal in axial direction for 10 seconds.
No visible damage and cutting off.

TEST CONDITION. 
Standard Test Condition              :      a) Temperature : +5 ~ +35℃  b) Humidity : 45-85%        c) Pressure : 860-1060mbar 
Judgment Test Condition             :      a) Temperature : +25 ± 2℃    b) Humidity : 60-70%        c) Pressure : 860-1060mbar 
 

G. PACKING STANDARD 
Each minimum package unit of products shall be in a carton box and it shall be clearly marked with Part Number, quantity and outgoing inspection number. There shall be no mechanical damage on products during transportation and/or in storage.


[return]

CLOSE
OPEN
  在線客服
风采好运彩3 代客理财风险很大 千禧3d试机号分析总汇 14日世界杯比分 好运来娱乐城官方网站-点击进入 网赚买彩票是骗钱的吗 韩国快乐8开奖结果 乐彩网排列五走势图 开元棋牌外挂软件下载 江苏时时彩技巧集锦 内蒙古快3下载安装到手机 北京赛车理 北京PK10官网开奖 苹果手游棋牌游戏 江西时时彩2000万 泛亚电竞竞猜 江西多乐彩前三走势图